 |
|
|
 |
 |
 |
|
|
|
|
|
|
|
|
TECHNICAL
STRENGTH
Material
Lexan grade 943 Polycarbonate engineering plastic from GE. USA.
It is Tough, resistant to aging , non-ignitiable,
insulating,ultra violet resistant.
a) Spring-Stainless steel spring
b) Current carrying parts are Brass, Copper, Bronze and Silver alloy.
Resistance
to HUMIDITY
Philcon products are subjected to Humidity Treatment
with a relative humidity between 91% to 95%.
The temperature of the air in which the samples are tested is maintained
between 15° C to 55C°.
Specified
dimensions of hole diameter for conductors
Specified
dimentions 6A-4mm/16A-4.5mm (This hole along with the
screw in the switch has the function of tightening the wire when inserted in the hole).
a)
Universal mounting holes and hence can be installed on many metal
boxes available in the market.
b) Oval
mounting holes for good alignment even on bed shaped metal boxes.
c) Two
Plates Strong construction so no visibilility of mounting screws.
d) Top
frame can temporarily be removed when painting walls etc…to avoid
dirtiness and re-fix afterwards.
e) High
impact strength, plates do not break even when twisted.
f) U.V.
stabilized and hence does not fade with the time.
Making
and Breaking capacity
Switches
are capable of making and breaking an electrical circuit at 1.1
times rated voltage and 1.25 times rated current. Mechanical on/off
setting of 200 operations at a uniforms rate of 30 operations per
minute, for 6A & 15 operations per minute for 16A.
On
normal operations
The
switches having rated current of 6A/16A passes through normal operations
of 20000 switching cycles i.e. 40000 operations, inductive load
of 6A/16A with low power factor cos 0.3 ± 0.5.
Resistance
to abnormal heat and fire
All
Philcon products passes the glow wire test at a temp of 960C°
in which the glow wire is to be contacted with the specimen which
is to be tested for a period of 30 ± 1 sec. The heating temp
is maintained during this period.
Terminals
& Screws
Pull
at vertical and circular motion with a speed of 1 Turn per 5 Seconds.
Required
Pull & Area of the conductor
| |
Area |
Pull Neutral
|
| 6A Switch |
From 0.75mm2 upto 1.5 |
40 |
| 16A Switch |
From 1.5mm2 upto4 |
60 |
Contacts
Solid Silver Cadmium Oxide 0.5 mm Layer for the high and long life.
Riveting
Pnumetically riveted contacts for high sheering strength
and stable current flow for low heat and long electrical life.
Activator
66 Nylon 33% glass field for long & proper motion life of On/Off is
being used.
Sockets Contacts
Contacts tubes for better conductivity besides retaining its shapes are made out SPRING HARD Phosphorus Bronze,
retains it springiness even after 10000 operations hence not heats
up.
‘C’ Spring
An unique design spring with holder to further improve the contact pressure
and hence the life of socket.
Safety shutters
Uniquely designed vertical mechanism.
Dalrin material which fully covers the live contacts & protects
the children form the accidental shocks.
Toxication
It is negligible equivalent
to Zero.
Melting Point
LEXAN grade 943 material’s melting point is 230° C– 260° C. After
melting it will take a shape of a lump/powder.
Mechanical Strength
With the help of 150kg hammering pendulum pressure from a distance of 01
mtr to the product will prove its strength.
Electrical Strength
All switches are tested at 2000 volt R.M.S. for high voltages tests.
Rusting & Oxidation
All terminals are plated with silver for the protection.
Warranty
The entire range of Philcon modular
plate switches and accessories (except electronic modules) are provided
with a warranty of 15 years against the entire manufacturing defects.
Free of cost, replacement will be given against the defective or
failed modules during normal operation. This does not cover the
failure or damages due to mishandling or usage beyond recommended
specification. Electronic modules are provided with 2 years of warranty.
|
|
|
|
|
